Cytometa FlowControl
One instrument.Four sample lines.
A schedule you set from the platform, and a board that runs it.
One board, four lines
You have four sampling points.You don't need four of everything.
Sampling points
- Inlet
- After filter
- Reservoir
- Network
FlowControl
Your instruments
Set it from your desk.The board does the rest.
No laptop in the cabinet. No site visit to change a schedule.
Switches sample lines
Four named flows, in blocks of 15 minutes
Regulates output flow
Holds the rate you set, in ml/min
Controls BactoSense
Measure, clean and prime, per step
Reads sensors
Four 4-20 mA inputs, on your metrics
Specification
- Inputs
- 4 × 4-20 mA analog, for flow and customer sensors.
- Outputs
- 4 × 24 V PWM, 4 × digital out, 4 × 24 V relay.
- Regulation
- PID on 4-20 mA feedback. Duty limits you set, closes on fault.
- Switching
- Up to four flows, anchored to midnight UTC.
- BactoSense
- Measure, clean and prime, on the same schedule.
- Persistence
- Config and error log in A/B flash, CRC32 checked.
- Interface
- JSON REST API and an HTML status page.
- Updates
- Over the air. No site visit for firmware.
We supply the board. Valves, tubing and panel are yours.
Get started
Start with one site.Keep it or send it back.
One site. One router. On screen within a week.
Request a trial- We ship the router.
- Your own data from day one.
- If it disappoints, we take it back.